Hormone levels and the right cycle day
ca. 19 Minuten

Key takeaways
For hormone levels, cycle day is part of the result. The MSD Manual, Professional Edition, gives an FSH level above 25 IU/L for the late menopausal transition and explicitly ties this result to cycle days 2 to 5 (as of January 2024).
The reason is the same as for any fluctuating level. The Institute for Quality and Efficiency in Health Care puts it generally: Many hormone levels change considerably throughout the day, and when blood is drawn matters (as of April 2, 2025). With the menstrual cycle, the day of the month also comes into play, in addition to the time of day.
First, you’ll read why cycle day matters. Then come how to count it, sample collection in five steps, dealing with irregular cycles, the rule for a second measurement, comparing values by cycle dependence, and the limitations of the method.
What to expect in this article
1. Why cycle day determines the number
2. How to count cycle days
3. Sample collection in five steps
4. What applies when cycles are irregular
5. Why the second measurement needs to be on the same day
6. Who benefits from planning
7. What else can shift the level
8. Which levels depend on the cycle and which do not
9. What a capillary blood test can show here
10. Limitations: what the right day cannot resolve
11. What matters about cycle day
Frequently asked questions
Sources
Why cycle day determines the number
For most blood test results, the date is a formality. For cycle-dependent hormones, it is the condition that makes the number interpretable at all.
This can be illustrated with a single detail. For the late menopausal transition, the MSD Manual, Professional Edition, gives an FSH level above 25 IU/L on cycle days 2 to 5 (as of January 2024). Cycle days are not an add-on there, but part of the result.
Documented source
“Follicle-stimulating hormone (ovarian insufficiency); if the level is high, it should be remeasured at least twice a month”
MSD Manual, Professional Edition
Amenorrhea, section on blood tests, as of September 2025
The sentence says two things. First, a single high FSH result is not enough. Second, the test is repeated monthly, in sync with the cycle rather than at an arbitrary interval.
That makes timing central. Not as a detail for perfectionists, but as the condition that makes two values meaningfully comparable.
How to count cycle days
Counting is simple, yet often done incorrectly. Cycle day 1 is the first day of bleeding, not the day after and not the last day of the previous period.
This means actual bleeding, not spotting. If you are unsure, note both separately and bring the note to your appointment.
This way of counting naturally gives us the window for FSH. Cycle days 2 to 5 means the second through fifth day from the first day of bleeding, usually still during or shortly after bleeding.
This surprises many people because the timing seems inconvenient. It is still the right time because the reference ranges are based on it.
Why the beginning of the cycle in particular
The reason is the relative calm. At the beginning of a cycle, no follicle has yet matured very far, so feedback from the ovary is correspondingly low.
During this phase, FSH shows most clearly how much the pituitary gland needs to adjust its activity. Later in the cycle, the processes around ovulation obscure this picture.
In other words, cycle days 2 to 5 are the time with the least noise. That is why this window has become the reference point, rather than a time that fits the calendar better.
For you, when reading a result, this means that an FSH value from cycle day 18 cannot meaningfully be compared with a reference for days 2 to 5. It is not an incorrect measurement, just one without the appropriate benchmark.
Sample collection in five steps
The following sequence describes a sample collected at home. The order is not arbitrary, because each step prepares for the next.
From planning to sending the sample back
Beforehand: have the kit ready and know the window
Have the kit ready before bleeding starts. If you order it afterward, you will miss the window because delivery takes several business days. Read the instructions all the way through once.
Record day 1
Note the first day of bleeding, with the date. The clock starts here. Everything that follows depends on this one date.
Collect the sample during the day 2 to 5 window
This is the period to which the FSH information in the medical literature refers (MSD Manual, professional edition, as of January 2024). Collect the sample in the morning, because many hormone levels change significantly throughout the day. The specific steps are in the kit instructions.
Record five details
Collection date, cycle day, time, all medications and supplements taken in recent weeks, and the length of the last three cycles. These five lines will later determine whether two results can be compared.
Send it on the same day
The sample should be sent back without delay. The shorter the time between collection and arrival at the lab, the fewer questions will arise later about the sample's stability.
The first step is where most planning fails. A kit ordered after bleeding begins usually arrives too late for that same window.
What applies when your cycle is irregular
Herein lies the practical contradiction of this topic. Those who want to test because of an irregular cycle have the hardest time choosing the right day.
The early transition phase is defined by precisely this irregularity: a persistent difference of at least seven days in the length of consecutive cycles (MSD Manual, professional edition, as of January 2024). The late phase is defined as amenorrhea lasting at least 60 days.
The solution is to use an event instead of the calendar
Because the window is measured from the first day of bleeding, there’s no need to predict it. The cycle day is tied to an event that occurs, not a planned date.
In practice, this means keeping a kit on hand and testing within the next few days once your period starts. This approach also works when cycle lengths vary widely.
If your period is absent for a prolonged period, the window does not apply. In that case, the timing of the sample is a question for your doctor, and the answer will take the pattern over time into account.
What remains in both cases is the note. A result annotated with the fact that your last period was 74 days ago is more valuable than a result with no information at all.
The cycle calendar is the real groundwork
Anyone who notes the first day of each period for six months gains two things at once. First, the basis for planning the next window.
Second, something no blood test can provide: the pattern over time. The early transition phase is described by a persistent difference of at least seven days between consecutive cycles, and this can only be observed using a calendar.
That’s why this list is more valuable for a conversation at the doctor’s office than most people realize. Six dates on a piece of paper tell you more about the phase than a single FSH level without any context.
Why the second measurement needs to be taken on the same day
A single hormone level describes one day in one cycle. It only becomes meaningful when you have a second one to compare it with, and that comparison has one condition.
Two values taken on different cycle days compare two phases of a cycle, not two points in time in your life.
If the first sample was taken on cycle day 3 and the second on cycle day 14, you’re measuring the difference between two phases of the same cycle, not a change over a year.
Therefore, using the same cycle day is the most important rule for repeating the test, followed closely by the same time of day and the same preparations. And because reference ranges can vary from one lab to another (IQWiG, as of 02.04.2025), using the same provider is the easier choice.
What interval between two measurements makes sense
For the assessment of ovarian insufficiency, the literature recommends monthly intervals with at least two repeats (MSD Manual, professional edition, as of September 2025). The cycle sets the pace.
For a question about how something changes over the years, a longer interval makes more sense. A process that typically takes four to eight years rarely shows anything new in four weeks.
Which interval is right for your question is decided in clinical practice. What remains the same in both cases is the requirement: the same cycle day, comparable conditions, and preferably the same lab.
Without these three conditions, a second measurement is not a repeat but a new standalone measurement. It costs nothing to make the distinction, but it determines whether you end up with a trend.
Who benefits from planning
Not every question about hormone levels requires a precisely planned window. The comparison works both ways.
It makes sense for you if …
FSH, LH, or estradiol are on your wish list. Cycle day is crucial for these three.
You are planning a second measurement and want to make the first result comparable.
You can keep a kit on hand so the window isn't missed because of shipping.
You want to bring results to a medical appointment that can be interpreted.
Probably not, if …
You are interested in TSH, ferritin, or long-term blood sugar. These values are not tied to the cycle day.
Your period has been absent for some time. In that case, the window does not apply, and you should discuss the question with a medical professional.
You use hormonal contraception. It overrides the cycle you want to measure.
You expect the result to tell you something about fertility or ovulation. A single measurement at one point in time cannot provide this information.
What else can shift the result
The cycle day is the most important condition, but not the only one. Two others belong on the same checklist.
The time of day
Many hormone levels vary considerably throughout the day, so the time of day when blood is drawn matters (IQWiG, as of April 2, 2025). For the female menstrual cycle, this condition is added to the time-of-day requirement; it does not replace it.
In practical terms: measure in the morning and note the time to the exact minute. The companion article Cortisol blood test: what time matters covers how narrow these time windows can be.
Medications and hormonal products
Hormonal birth control interferes with the feedback system the test is meant to measure. The same applies to hormone therapy that has been started.
Other medications also play a role. For prolactin, for example, a value between 50 and 100 ng/ml is considered mildly elevated and is usually due to the use of a medication (MSD Manual, Professional Edition, current as of September 2025).
That’s why every medication belongs on the list, even one you assume has nothing to do with hormones. Your clinician’s office will determine how to classify it.
Which values depend on the cycle and which don’t
Not every value on a woman’s lab report needs a timing window. The table compares three groups across the same four criteria.
| Criterion | FSH, LH, estradiol | Progesterone | TSH, ferritin, long-term blood sugar |
|---|---|---|---|
| Cycle-dependent | Yes, strongly | Yes, with a different window than FSH | No |
| Documented connection | FSH above 25 IU/L on cycle days 2 to 5 in the late transition phase | No information on the cycle day in the sources reviewed | No cycle-related timing in the sources reviewed |
| What needs to be planned | The window from the first day of bleeding and the time of day | Discuss the timing in practice, as it depends on the question being asked | No cycle-related timing; some values have other requirements, such as fasting |
| For irregular cycles | Measure from the start of bleeding; the event replaces the calendar | Difficult to schedule without a reference point; discuss with your clinician | Can be scheduled as usual, regardless of your cycle |
The second row has two blank spaces, and that’s intentional. We found no information on progesterone or the cycle day in the sources we reviewed, so there’s no number there rather than an estimate.
The last column is the reassuring one. If you’re having TSH, ferritin or long-term blood sugar measured, you don’t need to pay attention to your cycle and can test at any time.
What this means for choosing a test
The table suggests a practical order. First clarify the question, then choose the test, and only after that plan the appointment.
If you want to know where you are in the menopausal transition, you need FSH and therefore a testing window. If you want to check the most likely alternative explanations, namely thyroid function, iron stores and glucose metabolism, you don’t need a window.
This distinction saves unnecessary planning. A profile without cycle-dependent values can be collected any morning, which makes a real difference in everyday life.
If you need both, plan around whichever has the stricter timing. The window for FSH then sets the date, and the other values can be measured at the same time without any downside.
What a capillary blood test can show here
A capillary blood self-test does not provide a diagnosis. For cycle-dependent markers, its advantage is that you choose the day yourself instead of waiting for an appointment at a clinic.
Two tests from mybody®x (MYBODY Lab GmbH) differ in how they relate to the menstrual cycle. The cards explain what they can and cannot do.

Capillary blood test
Menopause Check | Menopause Hormone Test
Includes 8 markers: estradiol, FSH, LH, progesterone, SHBG, TSH, testosterone and DHEA-S. Four of these are tied to the cycle, so the timing of the sample is crucial. What the test does not do: it provides readings at a single point in time, not a trend, and it says nothing about ovulation or fertility. It does not provide a diagnosis or replace a medical examination.
Lab analysis 3–5 business days after sample receipt
Product page information, retrieved 13.08.2026

Capillary blood test
Women’s Wellness Check | Women’s Health Test
Includes 18 markers, including the complete thyroid profile of TSH, fT3 and fT4, as well as ferritin, vitamin B12, long-term blood sugar, the cholesterol profile, prolactin, SHBG and cortisol. Most of these are not tied to a particular cycle day, so you can plan the test freely. What the test does not do: it does not include FSH, LH or estradiol, so it cannot answer questions about your cycle phase. It does not provide a diagnosis.
Lab analysis 3–5 business days after sample receipt
Product page information, retrieved 13.08.2026
Four things determine whether a measurement yields useful information.
Have the kit ready beforehand
If you order after bleeding starts, you'll miss the window.
Count from day 1
Cycle day 1 is the first day of bleeding; everything else follows from there.
Record five details
Date, cycle day, time, supplements, and the lengths of your last three cycles.
Plan to retest
A high FSH level should be measured again at least twice a month.
Chapter at a glance
A capillary blood self-test lets you choose the cycle day yourself instead of waiting for an appointment. For FSH, LH, and estradiol, that day affects how the result can be interpreted; for TSH, ferritin, and long-term blood sugar, it doesn't matter. Four things are key: have the kit ready beforehand, start counting from day 1, record five details, and plan to retest.
Limitations: what the right day can't solve
The first limitation is the most important. Choosing the right cycle day does not turn a single measurement into a trend. It ensures the number is compared against the right benchmark, and nothing more.
The second limitation is retesting. A high FSH level should be measured again at least twice a month (MSD Manual, professional edition, as of September 2025). Correct timing does not replace retesting; it makes retesting meaningful.
The third limitation is a gap in the sources. We found no reliable information on the right cycle day for progesterone. That is why the text gives no number, and the question is best addressed in a medical consultation.
The fourth limitation concerns what the results can tell you. This article covers the comparability of measurements. You cannot use them to draw conclusions about ovulation, fertility, or when conception will occur.
Why cycle day matters
If you take away one action from this article, let it be this: note the first day of every period, and have the test kit ready before you need it.
The reason is unremarkable, yet it determines everything. The window for FSH opens on the second day after an event that cannot be planned and closes on the fifth.
It started with the question of which cycle day counts. For FSH, the answer is days 2 to 5, counting from the first day of bleeding. More important than the answer is getting into the habit of recording the day at all.
It may seem like a lot of planning for a single lab value. But the effort comes down to two things: a kit in the cupboard and a line in the calendar.
By contrast, there is a difference between a number that can be interpreted and one that cannot. That difference cannot be established later, which is why planning comes first.
Frequently asked questions
On which cycle day should hormone levels be measured?
For FSH, the MSD Manual, Professional Edition, specifies cycle days 2 to 5 and cites a level above 25 IU/L in relation to the late menopausal transition phase (as of January 2024). Cycle day 1 is the first day of bleeding. The cycle day does not matter for TSH, ferritin or long-term blood sugar.
How do I count the cycle day correctly?
Cycle day 1 is the first day of proper bleeding, not the following day and not any spotting beforehand. Count from that day. This gives a testing window of days 2 to 5, which usually falls during or shortly after your period.
What should I do if my cycle is irregular?
The window is calculated from the first day of bleeding, so no prediction is needed. In practice, this means keeping a kit on hand and testing as soon as bleeding starts. If your period does not come for an extended time, the window does not apply, and you should seek medical advice about when to test. In any case, note how long it has been since your last period.
Does the time of day matter too?
Yes. The IQWiG notes that many hormone levels vary considerably throughout the day, so the time of day when blood is drawn matters (as of April 2, 2025). With the menstrual cycle, this condition is added to the time-of-day requirement. In practice, this means testing in the morning and noting the time.
Can I get a meaningful test while taking the pill?
Hormonal contraception affects the same regulatory system that the test is intended to assess, and it also overrides the cycle used to determine the testing window. A hormone test result then reflects the situation while using the contraceptive. This is no reason not to test, but it is a reason to note the contraceptive and not interpret the results on your own.
Next step
Have the kit ready before the window
If you want to measure FSH, LH and estradiol during the right window, the Menopause Check measures these levels along with five others using capillary blood. It does not provide a diagnosis or replace medical evaluation.
Go to the Menopause Check Go to the Women’s Wellness CheckRead more
You might also be interested in
What the results show when the sample is taken at the right time.
The same question applies to the second condition: the time of day.
Sources
- MSD Manual, Professional Edition: Amenorrhea (as of September 2025) – msdmanuals.com
- MSD Manual, Professional Edition: Menopause, Pinkerton JV (as of January 2024) – msdmanuals.com
- Institute for Quality and Efficiency in Health Care (IQWiG): Understanding Laboratory Values Correctly, as of 02.04.2025 – gesundheitsinformation.de
The verbatim quote about a high FSH level recurring at least twice a month and the statement about slightly elevated prolactin between 50 and 100 ng/ml are from source [1]. The reference to FSH on cycle days 2 to 5 at over 25 IU/L, the definition of the early transition phase as a difference of at least seven days, and amenorrhea lasting at least 60 days are from [2]. The statement about daily hormone fluctuations, the note on the role of sampling time, and the information about differences between laboratories are from [3]. We found no reliable information in the sources reviewed about the appropriate cycle day for progesterone, so no figure is given for this in the text. Information about price, values, sample type, and laboratory is from mybody®x product pages, accessed on 13.08.2026; processing times follow the central guideline for blood tests. All sources were accessed and reviewed on 13.08.2026.
mybody®x Editorial & Specialist Team
Laboratory diagnostics Blood test interpretation Nutritional science Nutrigenetics
This article was created by the mybody®x editorial and specialist team. The team brings together laboratory diagnostics, nutritional science, and the interpretation of blood tests. You can find information about the contributors on the authors page.
Published on 13.08.2026 · Last updated on 13.08.2026
The content is for general information and does not replace medical advice, diagnosis, or treatment. Reference ranges depend on the laboratory, method, and age—the information on your report is always authoritative.

